Geometric field journal artwork
Geometric field journal artwork
Geometric field journal artwork

Ester: AI Beauty Mirror

Ester: AI Beauty Mirror

Ester: AI Beauty Mirror

10
RESPONSIBILITIES
PHYSICAL UX DESIGN
PROTOTYPING
RESEARCH
Timeline

March-October 2026

context

Designing the hardware interaction of a connected AI beauty mirror

At Ammunition, I worked as a Physical UX Designer across a range of products. For Ester, I was the only hardware UX designer on this project, working on a category-defining AI beauty mirror from kickoff through manufacturing readiness. I collaborated with industrial designers, Ester’s brand, hardware engineering, and digital teams to prepare the mirror for launch.

My work spanned interaction design, digital and physical prototyping, and usability testing. I focused on how the mirror’s physical controls and light and sound cues worked with the companion app to help people learn and repeat a skin scan at home.

the problem

The gap in skin tracking solution

Ester saw a gap between the skincare decisions people make every day and the feedback they get about what’s working. Phone-based tools make skin analysis accessible, while professional systems like VISIA ( very expensive! ) captures details that ordinary photos can miss. Ester’s goal was to fill the gap in-between.

Phone is too unreliable

Phone-based tools make a skin check easy to start. Changes in lighting, distance, and angle can make photos harder to compare over time.

Visia is too exclusive

VISIA uses controlled lighting to reveal different skin features. It gave us a benchmark for consistent imaging in clinics and at beauty counters.

Design Opportunity

Make a clinical procedure delightful and repeatble for everyday Use

While achieving precise face positioning rigorously like a clinical-grade device is important for data analysis and embodying trust, Ester is also designed to be a luxury beauty object, not a tech gadget. Elevating the daily ritual of skincare and makeup is equally important.

Seamless Face Positioning 

Help people find the target distance and angle, then clearly confirm when they’re ready for capture. 

Create Ritual

Make the scan brief and easy to repeat alongside the skincare routine people already have. 

Assuage Privacy Concerns

Make it easy to see when the camera is physically covered. 

The process

Zooming in and out

I explored broadly enough to surface questions the team hadn’t yet asked, then narrowed in on the decisions that mattered most to the scan. I used working prototypes to test our assumptions early. That helped us see where people got confused, where the hardware might limit us, and what we needed to resolve next.

Interaction ideation

Explore what’s possible.

Buidling scenarios

Narrow to promising directions.

Prototyping light & sound

Surface risks early.

Control mapping

Prioritize everyday actions.

User flow

Mapping out the big picture

I mapped what the user does alongside what the mirror needs to sense, decide, and communicate. At each step, I flagged the inputs, outputs, indicators, and controls the interaction might need.

That gave industrial design, strategy, and the client a shared view of the scan. I defined what the mirror had to detect and communicate while leaving room for the team to decide how.bendum urna ipsum, vel rutrum sapien tristique vel.

the goal

How might we:

… guide user to the exact distance and angle relative to the mirror?

A repeatable scan depended on finding a target about six inches from the mirror and turning to the required angles. The guidance needs to help users adjust, recognize alignment, and know when to hold still.

Initiate Scan Mode
Initiate Scan Mode
Initiate Scan Mode
Distance Guide
Distance Guide
Distance Guide
Start/End Scan
Start/End Scan
Start/End Scan
Uncover Camera
Uncover Camera
Uncover Camera
ideation

Exploration around key scanning moments

The mirror serves several functions, but the scan is central to Ester’s promise of helping people track changes in their skin over time. I started there, treating ideation like gathering ingredients before cooking. I explored what physical guides, controls, and feedback could each offer before deciding how to combine them into full scenarios.

scenarios

Narrowing down through building Scenarios

I started with four distinct approaches to scanning. Each would change the mirror’s hardware architecture and redefine the role of the mirror, the phone, and the user.

Hover to see the storyboards!

Physical guidance storyboard

Physical guidance

Computer vision storyboard

Computer vision

Smartphone-assisted storyboard

Smartphone-assisted

Smartphone-centric storyboard

Smartphone-centric

In review, the client narrowed the exploration to two directions:

physical guidance and computer vision.

I developed three scenarios around the same scan. Each showed what the user would do, what the experience would feel like, and what hardware would make it possible. Walking through the same scan three ways helped the team see the tradeoffs in context and narrow the work to one direction.

For each scenario, I showed what the user would do, how the mirror would respond, and what hardware the interaction would need. That made the client discussion more concrete. We could walk through a scan together and see where each concept placed the burden on the user or the device.

Physical guidance

Computer vision

Hybrid with proximity sensor

the new challenge

Round 2, How might we:

…guide precise movements with light and sound alone?

A repeatable scan asked people to do something awkward:

  1. Lean in until their face was about six inches from the mirror

  2. Turn to a specific angle while holding that distance.

  3. Close eyes until scanning lights fired.

Turning made the mirror’s lights harder to see, and users had to close their eyes before the capture flash. With only light and sound, I had to make it clear how to adjust, when to hold still, and when it was safe to open their eyes again.

…guide precise movements with light and sound alone?

A repeatable scan asked people to do something awkward:

  1. Lean in until their face was about six inches from the mirror

  2. Turn to a specific angle while holding that distance.

  3. Close eyes until scanning lights fired.

Turning made the mirror’s lights harder to see, and users had to close their eyes before the capture flash. With only light and sound, I had to make it clear how to adjust, when to hold still, and when it was safe to open their eyes again.

prototype

Exploration through interactive prototyping

I built seven webcam prototypes in p5.js so the team and client could try the concepts in a browser. Internal testing gave us an early read on which light and sound cues made sense as people moved.


limitation

Pilot twist! New hardware limitation unveiled

At the client review, we learned that cost and lighting architecture limited the mirror to two LED panels without individually controllable segments. Surfacing that constraint while we were still exploring helped us quickly pivot.

Despite the early interface concepts relying on a fully addressable light ring, the client found my exploration inspiring. The prototypes showed ways to combine light and sound they hadn’t considered, like using a chime to make finding the right position feel satisfying or using countdown to tell people how long to hold still with their eyes closed. We carried those ideas into the two-panel design to make the scan easier and more enjoyable to follow.

interaction design

Light behaviors design

I approached the LED cues the same way I approached the early concepts. I laid out my ingredients first: pattern, hue, and layout. Then I explored how to combine them to guide someone’s distance from the mirror and the angle of their head.

I asked what a steady light might signal compared with a slow pulse, which hues felt comfortable up close, and where a cue would still be visible when someone was inches from the mirror or turning their head away. Those questions helped me choose which combinations to prototype.

Pattern

Hue

Layout

Audio cue design

I used Ableton and animation to explore ways sound could guide positioning: a single confirmation tone, a pitch that rose as users moved closer to the target, and a chord progression that conveyed the same progress through harmony.

I then narrowed the scan to a small set of essential cues. Sound mattered most around capture, when users had to close their eyes before the flash. A tone asked them to close their eyes and hold still, and a distinct chime confirmed capture and told them they could open their eyes again.

Building these cues taught me how to use pitch, harmony, and timing to communicate what the user needed at each step.

Confirmation

Gradual pitch shift

Chord Progression

LED language

I mapped what could go wrong before, during, and after a scan, from a covered camera or a face moving out of range to a processing failure. A single LED had to make it clear whether to adjust their environment, check the camera cover, open the app, or reset the mirror.

Even with a single LED, I could change its color, blink pattern, and how it transitioned between states. I started by asking what each behavior might remind someone of and how that association might make them feel. A quick pulse can evoke a racing heartbeat and suggest urgency, while a slow fade can recall steady breathing and make a wait feel calmer. I used those associations to decide how each cue should draw attention.

Hardware control mapping

I ranked the mirror’s actions by how often people used them and what could happen if they triggered one by accident. A survey showed that people tended to stick with one hue and adjust brightness more often, so I gave brightness the most direct gesture and made hue switching less prominent. Starting a scan activates the camera, so I wanted that action to take a deliberate gesture.

As for the specific gestures mapping, I borrowed mental model from everyday controls to each concept a familiar starting point. I explored what a turn, press, or double press should do, whether the dial should have tactile detents and how many, and whether a hard stop could mark an off position.

I also helped the product manager source buttons and dials so we could compare turning torque, press resistance, and the feel of detents and hard stops. When I couldn’t find an off-the-shelf part with the tactile response I wanted to test, I modeled and 3D-printed a prototype. I designed the parts to be easy to print and assemble so we could try the feel on physical hardware.

Prototype

A working prototype surfaced engineering risks

I built a working Raspberry Pi prototype to see what would happen at the actual scan distance. The first camera couldn’t fit the whole face in frame. A wide-angle lens solved that problem, but its distortion made tracking harder. I used OpenCV to correct the image, and at one point my setup tracked the face more reliably than the client’s prototype. Building the scan exposed issues I could bring to the client’s engineers early, with a working setup we could compare.

Building a bridges

I defined what each light behavior meant: a slow pulse asked users to move closer, a fast pulse asked them to move back, and a steady light confirmed they were in range. The visual designer could then shape how each cue felt. I built a control panel inspired by the After Effects timeline so they could adjust timing, brightness, and easing in a familiar interface and see the changes directly on the mirror.

Hardware control gestures

Several dial mappings made sense on paper. I built the most promising ones on physical hardware so we could live with them for a bit. Repeating everyday actions and switching between functions let us feel which gestures came naturally and which made us pause to remember what to do.

NEXT STEP

The journey isn’t over

The scan is one part of a larger experience. My work also touched how people first meet the mirror when they open the box, how the app teaches them to scan, and how those first interactions help them build a routine. I’m looking forward to seeing how people make Ester part of their day once it reaches their homes.

APP onboarding

APP onboarding

Out-of-the-box experience (OOBE)

Out-of-the-box experience (OOBE)

User Testing

User Testing